STC-HD133DV

1/3" CCD Image Sensor

True 720p, High Definition Output

Low Cost & Compact Case Size

Name Specifications

Model No STC-HD133DV

Imager S” Interline SXGA CCD: ICX445AQA

HD Active Picture Element 1280 (H) x 720 (V)

Chip Size 6.26 (H) x 5.01 (V) mm

Cell Size 3.75 (H) x 3.75 (V) ¼m

Minimum Scene Illumination 5 Lux at F1.2 at 50% IRE; AGC ON and 1/60 second shutter speed with IR Cut Filter

Resolution 600 TV Lines

Sync System Internal

Video Output DVI 1.0 compliant; RGB, 1280 (H) x 720 (V); 60 Hz / 59.94 Hz / 50 Hz

ALC Can be configured via the UART communication; w/ Optical Iris, Auto Electronic Shutter and AGC

Shutter Speed Adjustable shutter speed via the UART Communication; Up to Up to 1/100,000 seconds at 60Hz / 59.94 Hz or up to 1/83,947 seconds at 50Hz

Gain AGC or Fixed gain, selectable via the UART communication; Gain range: 0 to 18.3 dB

Digital Gain Up to 5.9866 dB

Gamma 1.0, 0.9, 0.8, 0.7, 0.6, 0.5, 0.45, 0.3 or manual gamma; Gamma selectable via the UART communication

White Balance Auto / Manual / Push-to-set; Selectable via the UART communication

Mirror Image Normal Image and Horizontal Flip are selectable mirror image via the UART communication

DSP Presets Twenty eight DSP presets Selectable picture mode via the UART communication

Line Generator Both horizontal and vertical available with all colors; Thickness adjustable via the UART communication

Shadow Mask Generator Horizontal and vertical with shading level adjustment via the UART communication

Communication +3.3V UART communication via 3.5D stereo jack

Character Generator Built-in character generating function via the UART communication

Pixel Blemish Collection Up to 64 pixel blemish static collection

Power  

- Input Voltage +9 to +15 Vdc (Typical: +12 Vdc)

- Consumption < 3.0 W

Dimensions 40 (W) x 40 (H) x 45.8 (D) mm

Optical Filter IR cut filter included

Lens Mount C mount

Interface Connector  

- Video Output HDMI connector

- Power Input 12V power jack; 2.1mm DC barrel power jack plug w/ center pin position

- External Control 3.5D stereo jack w/ SW board

- Communication 3.5D stereo jack

Button Primary SW Initial press button function: push-to-set white balance Initial hold button function: Auto white balance (Function is selectable via the UART communication)

Weight Approximately 120g

Temperature  

- Operational 0 to +40 deg. C

- Storage -30 to +65 deg. C

Vibration 20 Hz to 200 Hz to 20 Hz (5min./cycle), acceleration: 10G, 30min., XYZ each directions

Shock Acceleration: 38G, half amplitude 6ms, 3 times XYZ each directions

Standard Compliancy EMS: EN61000-6-2, EMI: 55011

RoHS RoHS compliant